Request Information
  • Unwind with pneumatic loading up (max 200kg)
  • Vertical tube film gusseting device for easy operation side gusset
  • Sine wave cutting driven by 2 servo motor which enable to control sin wave change, operator could set wave via touch screen
  • 2 line sin wave bags aligning set by manual, very easy operation.
  • Large scale punch set which is able to change sizes.
  • Bag feeding use Servo motor from YASKAWA Japan, 3kw.
Unit of Measure

Specifications

Brands

 N/A Chovyting

Bag Type

 N/A Side Seal Sine Wave

Orientation

 N/A From Right to Left

Tube Film Unwinder Width

 N/A 1400 mm55.12 in

Maximum Unwinder Diameter

 N/A 900 mm35.43 in

S Type Cutting Height

 N/A 50 to 200 mm1.97 to 7.87 in

Bottom Gusset

 N/A 30 to 150 mm1.18 to 5.91 in

Total Power

 N/A About 12.2 kW

Noise

 N/A About 80 dB

Machine Weight

 N/A 3500 kg
Air Compressor Power1 N/A 6 hp

Width of Bag Making

Side Seal Bag Making Width

 N/A 100 to 750 mm3.94 to 29.53 in

Sine Bag Width

 N/A 250 to 750 mm9.84 to 29.53 in

Length of Bag Making

Side Seal Bag Making Length

 N/A 250 to 500 mm9.84 to 19.69 in

Sine Bag Making Length

 N/A 250 to 450 mm9.84 to 17.72 in

Thickness of Film

High Density Polyethylene (HDPE) Film Thickness

 N/A 0.025 to 0.05 mm0.0010 to 0.0020 in

Low Density Polyethylene (LDPE) Film Thickness

 N/A 0.035 to 0.08 mm0.0014 to 0.0031 in

Speed of Bag Making

Side Seal Bag Making Speed

 N/A 30 to 100 pcs/min

Sine/Wave Bag Making Speed

 N/A 30 to 90 pcs/min

Power

Optional Phase

 N/A 3

Optional Voltage

 N/A 415 V

Optional Frequency

 N/A 50 Hz

Machine Dimensions

Machine Length

 N/A 8500 mm334.65 in

Machine Width

 N/A 2500 mm98.43 in

Machine Height

 N/A 2050 mm80.71 in

Additional Information

Additional Information

 N/A
  • Whole machine pneumatic components use SHAKO from Taiwan.
  • Whole machine control panel use Taiwan Eview 5.7"
  • Whole machine PLC control driven by PANASONIC JAPAN.
  • With intellectual temperature controller.
  • Main motor 1.5 kw driven by inverter 1.5 kw from YASKAWA JAPAN.
  • Unwind EPC tracking, and printing mark tracking by SICK (KT5W) photocell.
  • Unwind maximum roll dia 900 mm, the unwind shaft is plug-in shafts. (Standard with one air cylinder)
  • Feeding traction use Inverter control from Delta taiwan.
  • Punch-out wastes automatic collection, enable easy die heat maintenance.
  • Interval convey type for automatic collecting bags.
  • All temperature controller by solid relay.
  • 1 Not Included